|
|
|
CONNECTIVITY
Leica System 500 (GS50, SR510, 520, 530)
The information supplied in the configuration details below is based upon BMGS field
tests and does not represent the views of the manufacturer or its representatives. This
information is provided solely for the purpose of assisting CDGPS users. Please consult
your GPS receiver User's Manual and/or Dealer for more complete instructions on using the
features of your GPS receiver.
Information provided by: TerraPro GPS Surveys Ltd.
| Configuration Tested: | Leica System 500 (GS50, SR510, 520, 530)
Power: 2 external Camcorder Batteries.
Firmware: Version 4.10 |
| Data Logger: | Leica TR500 Terminal
Power: Draws from External power
Firmware: ? |
| Antenna: | Leica AT501/502.
|
| RTCM Reception Indication: | RTCM input to GS50 is indicated by the thrusting arrow and a target symbol (circle with cross hairs) in the upper LHC of the TR500 handheld |
| General Notes: | Refer to System 500/GS50 User manual. |
System 500 Settings:
| Setting | Key Sequence on System 500 | Settings |
| RTCM Input Mode | Press config/interfaces/real-time/edit – then Press F5 (Device) then F3 (Edit) | - Name: *RS232
- Baud Rate: 9600
- Parity: None
- Data Bits: 8
- Stop Bits: 1
- Flow Contol: None
|
| RTCM Version | Choose Port A, B, or C |
| Baud Rate: | Press config/interfaces/real-time/edit | - R-time Data: Rover
- Data Format: RTCM 1,2
- Port: 2 *RS232
- Radio Down: Your Choice
- Log After: Your Choice
- For Minimum: Your Choice
|
| RTCM Settings | Press config/interfaces/real-time/edit – then Press F6 (RTCM) | - RTCM Version: 2.1
- #Bits/Byte: 6
- Ref Net: No
- Telemax: No
|
| Other Notes: | - Ensure your position update rate is set to 1 second: config/datacollection/positionupdate rate
- Ensure you save the changes in the receiver: Config/(F3) Store
|
More CDGPS setup information here
For information on CDGPS connectivity issues please call (250) 356-7091 or send an e-mail to Vern Vogt, P.Eng
|
|
|
