The information supplied in the details below is based upon information
provided to BMGS. It does not necessarily represent the views of
the manufacturer or its representatives, unless it has been supplied
by them as noted below. This information is provided solely for
the purpose of assisting CDGPS users. Please consult your GPS receiver
User's Manual and/or Dealer for more complete instructions on using
the features of your GPS receiver.
| Configuration Tested: |
GPS Receiver: Trimble GeoXT
Power: :Internal
Firmware Version: _v 1.03 10 Jan 2003 |
| Data Logger: |
Model: _Internal/ ArcPad
Power: _Internal GeoXT
Firmware: _GeoXT |
| Data Input/Output Port: |
Set up input RTCM on COM1 with the “GPS Controller” software. |
| Supplied RTCM Cable: |
Part Number/Manufacturer: _normal MODEM cable DB9F to DB9F. |
| Cable & Connectors Used in BMGS Testing: |
Using the above cable, a null modem IS NOT required. |
| Antenna: |
Internal |
| RTCM Reception Indication: |
On GeoXT “GPS Controller” software, under the real-time page,
reports “External source – In Use or Waiting” |
| Post Mission Data Access: |
NMEA positions logged in ArcPad as shapefile |
| General Notes: |
General Notes: CDGPS must be set up in the “GPS Controller”
software as the external source. The “GPS controller” software
must be running during data collection, or the receiver will
stop computing differential positions after the age-of-corrections
limit has timed out. |
